Dyna-Glo DGB730SNB-D Spécifications télécharger pdf (Page 22)

ASSEMBLY INSTRUCTIONS

Step 22: Insert the charcoal pan (21) into the support rails on the

bottom of charcoal grill body.

Step 23: Secure gas hose and LP gas hose holder (30) assembly onto

cart left side panel assembly (13) by tightening one M4x12

screw (D) and one M4 nut (F) into hole into cart left side table.

NOTE: The LP gas hose holder (30) must completely circle

the gas hose before securing onto cart left side panel (13)

as illustrated.

Hardware Used

D M4x12 Screw Qty: 1 pcs

F M4 Nut Qty: 1 pcs

Step 24: Open the cart door assembly (15 & 14) and insert the LP gas

cylinder (sold separately) into the nesting hole located in the

bottom shelf (1). Align the hand screw coupling of the

hose/regulator with the threaded valve of the cylinder by

turning the LP gas cylinder until positioned correctly. Hand

tighten the hose/regulator coupling to the threaded valve of

the LP gas cylinder. Tighten the tank screw until the cylinder

is secure inside the nesting hole of the bottom shelf (1).

Rotate the tank screw clockwise.

Dual Fuel Grill

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 125 126

Pas de commentaire

Dyna-Glo DGB730SNB-D Spécifications Page 22