Dyna-Glo DGB730SNB-D Spécifications télécharger pdf (Page 13)

Hardware/Parts Used

A M6x12 Screw Qty: 2 pcs

Step 7: Preassemble cart front vertical beam (8) and upper front door

brace (11) as “T” shape by using two M6x12 screws (A).

Step 8: Preassemble cart front vertical beam (8) and upper front door

brace (11) as “T” shape assembly. Insert two M6x12 screws (A)

into each of the top mounting holes (labeled as AA) on the cart

left side panel and cart right side panel (13 & 5), leaving 4-6mm

clearance from screw head to the cart left side panel and cart

right side panel (13 & 5). Attach the Cart front vertical beam (8)

and upper front door brace (11) assembly by placing the key

holes over the inserted screw head (A) on the side panels

(13 & 5), slide the upper front door brace (11) so that the screw

head is over the smaller hole. Secure the screws, but do not

tighten completely this time. Secure another two M6x12 screws

into holes (labeled as BB). Finally, secure the cart front vertical

beam (8) to bottom shelf (labeled as CC) by using two M6x12

screws (A).

Hardware Used

A M6x12 Screw Qty: 6 pcs

ASSEMBLY INSTRUCTIONS

Dual Fuel Grill

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 125 126

Pas de commentaire

Dyna-Glo DGB730SNB-D Spécifications Page 13